Oceanic 04.8367.24 Scuba Diving Equipment User Manual


 
16
ATOM 3.0 OPERATING MANUAL
© 2002 Design, 2011 Doc. No. 12-5216-r02 (9/6/11)
NORM SURF MAIN, information includes (Fig. 32):
> (PZ+) icon, if selected as Algorithm, no icon if DSAT.
> CF icon, if Conservative Factor is set On.
> Surface Interval time (hr:min) with SURF icon;
if no dive yet, this is time since mode access.
> Graphic NOR.
> Dive number with # icon, up to 24 for that operating period (0 if no dive made yet).
> TMT 1 Pressure with PSI (or BAR) and link (speaker) icons, if active.
#1 is the default in Surface Mode.
> FO2 Set Point (21 to 100%), if FO2 is set for Nitrox.
> NX icon, if FO2 is set for Nitrox.
> Gas/TMT (tank) 1 icon.
#1 is the default in Surface Mode.
> TLBG with icon, if any after a NORM or FREE dive.
> Battery icon, if voltage is low.
M (2 sec) - to access Watch Main.
A (< 2 sec) - to access NORM SURF ALT 1.
M (< 2 sec) - to access BATT/TMT.
L (press) - to activate the Backlight.
Upon surfacing during dives, the Dive Main will remain on display for the first 10 minutes, with Surface Interval time (SI) in place
of Depth, after which the post dive Surface Main will be displayed (Fig. 33).
NORM SURFACE GROUP, button operations* >>
These operations apply to all group selections that follow, those marked with * are not repeated when describing each selection.
A (< 2 sec) - to step forward through selections.
A (hold)* - to scroll forward through selections.
M (< 2 sec) - to step back through selections.
M (2 sec, any time)* - revert to Main.
No button action (2 min)* - revert to Main.
L (press)* - to activate the Backlight.
Various descriptions that follow (as labeled) apply to GAUG as well as NORM.
NORM SURF ALT 1, information includes (Fig. 34):
> SI* (hr:min) with SURF icon, prior to Last dive.
> Graphic LAST, indicating data is for the dive previously conducted while still in NORM mode.
> Max Depth* with MAX and FT (or M) icons.
> Elapsed Dive Time* (up to 999) with EDT and min icons.
*Dashes if no previous dive conducted.
• A (< 2 sec) - to step forward to ALT 2.
• M (< 2 sec) - to step back to Main.
NORM SURF ALT 2, information includes (Fig. 35):
> Altitude graphic (EL - 2 to EL - 7), blank if Sea level.
> Time of Day (hr:min_sec) with AM or PM icon if 12 Hour Format, no icon if 24 Hour Format.
> Temperature with ° icon and graphic F (or C).
• A (< 2 sec) - to step forward to ALT 3 if Nitrox, or FLY if Air.
• M (< 2 sec) - to step back to ALT 1.
NORM SURF ALT 3, information includes (Fig. 36):
This screen is bypassed if FO2 is set for Air and prior to first dives of an activation period.
> Current O2 saturation with O2% icon.
> PO2 alarm value set (ATA) with PO2 icon.
> FO2 set for Gas 1 (21 to 100%) with FO2.
> NX and Gas (tank) 1 icons.
> (PZ+) icon, if selected, no icon if DSAT.
> CF icon, if set On.
• A (< 2 sec) - to step forward to FLY.
• M (< 2 sec) to step back to ALT 2.
Fig. 33 - NORM SURF MAIN
(> 10 min after dive 2)
Fig. 32 - NORM SURF MAIN
(no dive yet)
Fig. 34 - NORM SURF ALT 1
(Last dive's data)
NORM SURF GROUP
(selection sequence)
---------------------
ALT 1 (Last)
ALT 2
ALT 3 (if Nx)
FLY
DESAT
PLAN
LOG
SET F
SET A
SET U
SEL DIVE OP
HISTORY
SN
BATT/TMT
Fig. 36 - NORM SURF ALT 3
(only if Nitrox)
Fig. 35 - NORM SURF ALT 2