Filter
Top Products
WS1EI & WS1.25EI Man u al
The user can initiate manual regeneration. The user has the option to request the manual regeneration at the delayed regeneration
time or to have the regeneration occur immediately:
1. Pressing and releasing the REGEN button. “ ” will fl ash towards Regen on the display and the regeneration will occur at the
delayed re gen er a tion time. The user can cancel the request by pressing and releasing the REGEN button.
2. Pressing and holding the REGEN button for approximately 3 seconds will immediately start the regeneration. The user cannot
cancel this request, except by resetting the control by pressing NEXT and REGEN buttons simultaneously for 3 seconds.
For additional software features and specifi c setup refer to the 1.5 & 2L manual for this software.
▲
Control Valve Function and Cycles of Operation • Page 2