Filter
Top Products
12
2. Press and hold or to begin scanning a CTCSS channel. If a
valid signal is present, the transceiver will pause on the current active
channel.
3. Press PTT to set and store the CTCSS channel, or the transceiver
stores the display setting after 15 seconds. The scan mode will
immediately search for the next CTCSS channel if no button is pressed
after 5 seconds.
4. Press PTT to stop scanning and exit the menu. Or, press MENU to stop
scanning and go to the next Menu Option.
SETTING VOX & BABY MONITOR
This setting automatically detects and transmits your voice through the
selected channel, without needing to push and hold PPT.
1. Press MENU 3 consecutive times until appears on the LCD.
2. Select between 6 levels of VOX by pressing or key.
LCD SYMBOL DESCRIPTION
0 VOX disabled
1 Low sensitivity – only audibly loud voices are
transmitted(useful for noisy environments)
EN