Filter
Top Products
15
Searching for and storing TV channels is done channel by
channel.You must go through every step of the Manual
Installation menu.
& Select Manual Store in the Install menu and press the
cursor right to enter.
é Select Colour system and press the cursor right.
If
Auto is selected, the respective colour system will be
automatically selected according to the transmission system.
If the reception is poor, select another colour system with the
cursor left/right.
“ Press the cursor down.
‘ Select Sound system and press the cursor right. If Auto is
selected, the respective sound system will be automatically
selected according to the transmission system.
Note: if the reception is poor, select another sound system with
the cursor left/right.
( Press the cursor down.
§ Search for a TV channel:
Press the cursor down to select
Search and press the
cursor right to start searching.
Direct selection of a TV channel:
If you know the frequency, enter it directly with the digit keys 0 to
9. Ask for a list from your cable company or dealer, alternatively
consult the Table of frequencies on the inside backcover of this
handbook.
è Press the cursor down and enter the programme number
with the digit keys.
!
Fine tune:
In case of poor reception, you can improve the reception by
adjusting the frequency with the cursor left/right.
ç To store your TV channel, select
Store and press the cursor
right. Repeat steps
é to ! to store another TV channel.
0 To exit from the menu press the
MENU key on the remote
control repeatedly.
Install
Language Colour System
Auto Store Sound System
Manual Store π Search
Sort Channel
Name Fine tune
Channel edit
Manual store
2446.2 en.qxd 03-08-2006 15:32 Pagina 15