Filter
Top Products
Chapter 1
3
1. LCD Monitor’s VGA Connector
This 1.5 meter cable has two 15-pin D-Sub VGA connectors used to connect the monitor to your PC’s VGA
card.
2. AC Power Jack
Connect the AC adapter cable to this jack.
3. Audio Line In (optional)
Connect your PC’s Line out to this jack to listen to the PC’s audio through your New Planar LCD Monitor’s
stereo speakers. (You can also connect your CD-ROM’s Line out to this jack.)
Adjusting the Viewing Angle
Your LCD Monitor is designed to allow you to adjust it to a comfortable viewing angle. The LCD Monitor’s angle
setting range is from -5° to 25°.
Connecting AC Power
1. Plug the female end of the power cable into the AC-adapter. Plug the male end of the power cord into a wall
socket. The plug on the power cable will vary according to the electrical standard in your area.
2. Connect the power connector of the adapter into the jack of the LCD Monitor. The AC power jack is located
at the rear of the Monitor near the D-sub VGA connector.