Filter
Top Products
Introduction
An important member
of
the
PYLE
marine MOSFET amplifier series, we are
pleased to introduce the unique PLMR440PA, a powerful amplifier with public
address capabilities.
This
PYLE
marine models features both high pass and low pass crossovers.
For further
flexibility
in
the use
of
a subwoofer, a variable bass boost control has
been
included. You can control the subwoofer level with the remote level control
module.
PYLE
marine understands that amplifiers are placed in many different kinds
of
installations, so we have also included
an
input sensitivity control to help you
integrate the amp into your system
regardless
of
the nature
of
your input source.
A custom microphone is
included. Pressing the button
on
the microphone will
mute the audio and allow you to
be
heard easily by others on your boat.
PYLE
marine amplifiers are constructed using a special corrosion resistant
coating
on
the printed circuit board to prevent damage from the high humidity
of
the marine environment.
In
order to prevent the intrusion of water into the amplifier enclosure, we
have provided the connections at the end of waterproof
wires/cables, and
tightly grommeted the wires as they pass through the end panels.
An additional important, unique component is the rubber pad which seals all
control
openings.
What
is
included?
When
first
unpacking
your
new amplified subwoofer, please check
first
that
the package contains all
of
the
items below.
If
something is missing, contact
the store where you purchased the product.
• Marine amplifier
•
Custom microphone
and
mounting bracket
• High input cable with connector(s)
• Speaker output cable with connector(s)
• Remote level controller
• Four(4) mounting screws
2-PLMR44OPA
Owner's
Manual