Filter
Top Products
10
OPERATION
1. To turn on the receiver, slide
POWER
to
ON
.
2. Set
SW/MW/FM
to the desired band. To tune a shortwave
broadcast, set
SW/MW/FM
to one of the SW bands (
1
to
10
).
See “International Frequencies” on Page 12 for information
about each SW band.
3. Adjust
TUNING
to tune to the
desired station then adjust
either of the radio’s antennas
if necessary (see “Adjusting
the Antennas” on Page 7).
The TUNING indicator on the
front of the receiver lights
when a station is properly
tuned.
4. Adjust
VOLUME
to a comfort-
able listening level.
5. Slide
POWER
to
OFF
to turn off the receiver.
(illus)
(illus)
(Illus)
(Illus)
20-227.fm Page 10 Wednesday, August 4, 1999 10:13 AM