Filter
Top Products
channel.
To delete a frequency from a monitor memory, store a new frequency in the
monitor memory.
Manually Selecting a Channel
You can continuously monitor a specific channel without scanning. This is
useful if you hear an emergency broadcast on a channel and want to hear
all the details (even though there might be periods of silence) or if you
want to monitor only a specific channel or a locked-out channel.
Follow these steps to manually select a channel.
1. Press MANUAL.
2. Use the number keys to enter the channel number you want to hear, then
press MANUAL again.
Notes: If your scanner is scanning and stops at the channel you want,
simply press MANUAL to manually select the channel.
If you repeatedly Press MANUAL, the scanner steps through the
channels.
PRO-2046 Programmable 100-Channel Mobile Scanner
(200-0149) Specifications Faxback Doc. # 46805
Frequency Coverage:
VHF Lo: ..................................... 29.7-50 MHz (in 5 kHz steps)
Amateur Radio: .............................. 29-29.7 MHz (in 5 kHz steps)
50-54 MHz (in 5 kHz steps)
144-148 MHz (in 5 kHz steps)
420-450 MHz (in 12.5 kHz steps)
Aircraft: ............................ 108-136.975 MHz (in 12.5 kHz steps)
Government: ................................. 137-144 MHz (in 5 kHz steps)
Amateur Radio/Government: ................ 406-420 MHz (in 12.5 kHz steps)
VHF Hi: ..................................... 148-174 MHz (in 5 kHz steps)
UHF Lo: .................................. 450-470 MHz (in 12.5 kHz steps)
UHF "T": ................................. 470-512 MHz (in 12.5 kHz steps)
UHF Public Service: ................. 806-823.9375 MHz (in 12.5 kHz steps)
UHF Hi: ............................. 851-868.9375 MHz (in 12.5 kHz steps)
896.1125-956 MHz (in 12.5 kHz steps)
Operation Channels: ............ Any 100 channels in any band combinations
(10 channels x 10 banks) and 10 monitor channels
Sensitivity: ...................... (20 dB S/N with 60% modulation for AM:
3 kHz deviation for FM):