Filter
Top Products
User Guide 5
GPS filtering
For optimum performance, set GPS device filtering to OFF or WEAK (see
your GPS device documentation for instructions on how to do this). If the
GPS is a Raymarine device, this is done automatically. Both transmit and
receive cabling should be connected.
Note: Not all GPS devices allow filter settings to be changed.
Wireless signal strength
Wireless signal strength (5 levels) is shown on the right hand side
of the display.
Keylock
When using your S100, you can temporarily lock the autopilot
keys to ensure that it is not accidentally operated.
How do I activate the keylock?
Press and hold the mode button until you see the key symbol and “LOCK”
message.
Note: You cannot activate keylock when the autopilot is in control of your
boat.
How do I turn off the keylock?
Press mode followed by the PILOT button. A “KEYLOCK OFF” message
will be displayed.
Performance check
The S1000 is factory-set to work straight out of the box for most purposes.
We therefore recommended that you test your S1000 as supplied, and
adjust the settings only if you feel that performance is not satisfactory.
D7667-1
81245_4.book Page 5 Monday, April 30, 2007 6:03 PM