Filter
Top Products
4-2-2 Section 4: Using Keypads
ST290 Instrument System Owner’s Handbook
The method of setting up the instrument groupings is described in
Section 7, System Setup.
2.2 Remote operation
General principles
Each keypad can control all the instruments in the associated groups of
instruments. Within each group, you select the instrument you want by
means of a button:
• An INSTRUMENT button, enables you to select the required stan-
dard ST290 instrument.
• A MAXIVIEW button, enables you to select the required Maxi-
View instrument.
Each time one of these buttons is pressed, a different instrument in the
associated group is selected to be controlled.
For example, in remote control group B, successive presses of the
INSTRUMENT button on the associated keypad would select
instruments B1, B2, B3 etc in turn. As each instrument is selected, it
either displays a remote indicator or presents inverse video, to show you
can control it from the Remote Keypad.
y
Figure 2-2: Typical remote control indicators
REMOTE
DEPTH FT
HEADING
Data display Graphic display
D5910-1
REMOTE
81183_2 S4 chap 2.fm Page 2 Wednesday, May 7, 2003 11:18 AM