RoadPro NN11 8RF Marine Sanitation System User Manual


 
4
14. Make sure that the parts line up prior to fixing
anything permanently.
15. Place the fixing strips on the left and right side
and turn the nuts carefully without moving the system.
16. Fix the nuts by means of the deep socket
spanner. This has to be done evenly.
Don`t tighten too much this to avoid breaking the
system!
17. Screw the panel in using the pre-drilled holes.
18. Check that the rubber seal prevents water
ingress.
19. Lead the water supply hose and wire over the
back of the cab.