Filter
Top Products
HX500S Page 27
to 12 characters).
9. After completing your adjustment, press the SQL switch to save the new
setting.
10. Press the PTT key to exit to normal operation.
dULdUL
dULdUL
dUL
(
DW DISPLAY
)
Function: Selects the Dual Watch scanning display mode.
Available Values: Normal / Special
Default: Special
When “Special” is selected the channel shown on the display is the last channel
the HX500S received a call on. This is a handy feature if you cannot look at
the radio the moment a transmission was received.
LPLP
LPLP
LP
(
LAMP MODE
)
Function: Selects the Lamp illumination method for the LCD and Keypad.
Available Values: Key / oFF / Cnt
Default: Key
Key: Illuminates the LCD/Keypad for 5 seconds when any key is pressed.
oFF: Disables the LCD/Keypad illumination.
Cnt: Illuminates the LCD/Keypad continuously.
SnLSnL
SnLSnL
SnL
(
SCAN LAMP
)
Function: Enable/Disable the automatic illumination of the lamp when a sig-
nal is received on a channel during Scanning.
Available Values: ON / OFF
Default: OFF
SCnSCn
SCnSCn
SCn
(
SCAN DISPLAY
)
Function: Selects the display mode while scanning.
Available Values: Normal / Special
Default: Normal
When this menu is set to “Normal,” the channel numbers during scan will be
shown scrolling on the display. When Special is selected the channel num-
bers on the display do not change unless a call was received. The channel
shown is the last channel that was received.
dtdt
dtdt
dt
(
DUAL WATCH MODE
)
Function: Selects dual or tri-watch as desired.
Available Values: d- (Dual Watch) / t- (Tri Watch)
Default: d-