Filter
Top Products
7
DONNING and INFLATION INSTRUCTIONS
After completing the pre-donning check, follow these instructions
to don, inflate and adjust the PFD for maximum performance.
1. Buckle the deflated belt
around your waist and
adjust to snug fit by pulling
on the free end of the belt.
Secure the excess strap by
tucking it under the belt.
Always position the belt
with the center window in
front. The Velcro® opening
should be on the bottom.
The “Jerk to Inflate”
lanyard should be hanging
downward.
2. Pull down on
the “Jerk to
Inflate” lanyard to
inflate chamber.
3. Grasp the neck
adjustment strap
tucked under the
inflated chamber. Slip
the strap (located at
the center of the
chamber) over your
head.