Filter
Top Products
15
1
2
3
4
1. Lay device out flat with
yellow inflatable chamber, arrows side, up.
2. Fold left side of chamber under and
fold again. Wrap Oral Tube Access Tab
around Oral Tube with a portion of the
tab left outside of the device. Refer to
Figure 3 for more detail. Secure Velcro
®
Strips.
Fold right side of chamber under and fold
again.
Secure Velcro
®
Strips.
Position Jerk to Inflate Tab below bottom
of clear window.
3. Fold upper left chamber under. Repeat
on right side. Secure upper Velcro
®
Strips.
4. Check to see that the Jerk to Inflate
Tab is hanging free and the status indicator
is clearly visible through the clear window.
REPACKING INSTRUCTIONS: Use guide lines on Yellow Chamber.
Deflate yellow chamber completely, smoothing chamber flat. Depress
the Oral Valve located inside end of Oral Tube (see fig 3) using the
Protective Cap by inserting into the end of the Oral Tube."
Oral Tube
Access Tab
Oral Tube