SUPRA - 23© 2005 Skier’s Choice, Inc.
Bilge Area Center Drain Plug
The bilge area center drain plug is located at the front of the
motor well, directly under the engine.
It is extremely important that the drain plug is always checked
before starting the engine. The drain plug should be secured
in place using a wrench.
NOTE: Not all Supra models have center drain plugs.
DO NOT start engine until center drain plug is checked
and secured in place. DO NOT try to install center drain
plug while engine is running!
Some Supra models DO NOT have mechanical devices to
hold the motor box cover in the open position. Please use
caution to prevent accidental closing.
The rear drain plug is located at the back of the boat, near
the bottom of the transom (See photo). It is extremely
important that the drain plug is always checked before starting
the engine. The drain plug should be secured in place using
a wrench.
DO NOT start the engine until the drain plug is checked
and secured in place.
DO NOT try to install the drain plug while the engine is
running.
Rear Drain Plug