Filter
Top Products
Display Indication
3. Transmitter is on another channel. To
correct this:
batt
Pressure transmitter battery voltage is low.
Change the transmitter battery!
3.25.4 Tank pressure alarm
There are two tank pressure alarms. The first is fixed at 50 bar (700
psi) and cannot be changed.
The second is user configurable. It can be turned on or off and can
be used for a pressure range of 10–200 bar (200-3000 psi).
To set the tank pressure alarm value:
1. While in a dive mode, keep [DOWN] pressed to enter settings.
2.
Press [DOWN] to scroll to
Tank Press Alarm
and press [SELECT].
3. Press [UP] to turn the alarm on and confirm with [SELECT].
4. Adjust the pressure level with [UP] or [DOWN] and confirm with
[SELECT].
5. Press [MODE] to exit.
3.25.5 Air time
Air time can only be displayed when a wireless tank pressure
transmitter is installed and in use.
To activate air time:
1. While in a dive mode, keep [DOWN] pressed.
2.
Press [DOWN] to scroll to Air Time.
71