Suunto SS020392000 Scuba Diving Equipment User Manual


 
The optional transmitter sends out a low battery (batt) warning
when its battery voltage is getting low. This is shown intermittently
instead of the pressure reading. When you get this warning, the
tank pressure transmitter's battery needs to be replaced.
3.22.2 Installing and pairing transmitter
When purchasing the Suunto Wireless Transmitter, we strongly
recommend that you have your Suunto representative attach the
transmitter to the first stage of your regulator.
The unit needs to be undergo a pressure test after installation and
typically this requires a trained technician.
In order to receive wireless data, the transmitter and the Suunto D4i
need to be paired.
The wireless transmitter activates when the tank pressure exceeds
15 bar (300 psi). The transmitter then starts sending pressure data
together with a code number.
When your Suunto D4i is within 0.3 m (1 ft) of the transmitter, it
receives and stores that code. The transmitter and Suunto D4i are
now paired. Suunto D4i will then display the pressure data it
receives with this code. This coding procedure prevents data mix-up
from other divers also using a Suunto Wireless Transmitter.
NOTE:
The pairing procedure normally only needs to be done
once. You may need to redo the pairing procedure if another diver
in your group uses the same code.
To assign a new transmitter code:
57