Suunto SS020396000 Scuba Diving Equipment User Manual


 
3.22.4 Tank pressure alarm
There are two tank pressure alarms. The first is fixed at 50 bar (700
psi) and cannot be changed.
The second is user configurable. It can be turned on or off and can
be used for a pressure range of 10–200 bar (200-3000 psi).
To set the tank pressure alarm value:
1. While in a dive mode, keep [DOWN] pressed to enter settings.
2.
Press [DOWN] to scroll to Tank Press Alarm and press [SELECT].
3. Press [UP] to turn the alarm on and confirm with [SELECT].
4. Adjust the pressure level with [UP] or [DOWN] and confirm with
[SELECT].
5. Press [MODE] to exit.
Air time can only be displayed when a wireless tank pressure
transmitter is installed and in use.
To activate air time:
1. While in a dive mode, keep [DOWN] pressed.
2.
Press [DOWN] to scroll to Air Time.
3. Press [UP] to turn on the air time reading.
4. Press [SELECT].
5. Press [MODE] to exit.
3.23 Tones
Device tones can be turned on or off. When tones are off, there are
no audible alarms.
To set tones:
60