Filter
Top Products
User’s Manual 7-3
HW Setup
Boot Priority
Boot Priority Options
This tab allows you to select the priority for booting the computer - the
following settings are available:
You can override the settings and manually select a boot device by
pressing one of the following keys while the computer is booting:
*
1
The floppy diskette drive will be used to start the computer when there is
a bootable disk contained in the external drive. If SD memory card is
installed as well, the external floppy diskette drive will be checked first,
followed by the SD memory device itself.
*
2
The optical disc drive will be used to start the computer when there is a
bootable disk contained in the drive.
FDD −> HDD −> CD-
ROM −> LAN
The computer looks for bootable files on devices
in the following order: 1. floppy diskette drive
*1
, 2.
hard disk drive, 3. CD-ROM
*2
, 4. LAN.
HDD −> FDD −> CD-
ROM −> LAN
The computer looks for bootable files on devices
in the following order: 1. hard disk drive, 2. floppy
diskette drive
*1
, 3. CD-ROM
*2
, 4. LAN.
FDD −> CD-ROM −>
LAN −> HDD
The computer looks for bootable files on devices
in the following order: 1. floppy diskette drive
*1
, 2.
CD-ROM
*2
, 3. LAN, 4. hard disk drive.
HDD −> CD-ROM −>
LAN −> FDD
The computer looks for bootable files on devices
in the following order: 1. hard disk drive, 2. CD-
ROM
*2
, 3. LAN, 4. floppy diskette drive
*1
.
CD-ROM −> LAN −>
FDD −> HDD
The computer looks for bootable files on devices
in the following order: 1. CD-ROM
*2
, 2. LAN, 3.
floppy diskette drive
*1
, 4. hard disk drive.
CD-ROM −> LAN −>
HDD −> FDD
The computer looks for bootable files on devices
in the following order: 1. CD-ROM
*2
, 2. LAN, 3.
hard disk drive, 4. floppy diskette drive
*1
.
U Selects the USB floppy diskette drive
*1
.
N Selects the network.
1 Selects the built-in hard disk drive.
C Selects the CD-ROM*
2
.
M Selects the USB memory drive.
E Selects the eSATA HDD.