Filter
Top Products
Install the APR Calibration file onto your computer
a) Insert the touchmonitor’s USB memory stick into your computer module’s
available USB port.
b) Copy the monitor’s APR calibration file from the Calibration USB drive to the
folder: C:\Program Files\Elo Touchsystems\APRdata
c) In the APRdata folder, rename the file to “AprCF.bin” and restart PC.
d) Keep this monitor’s USB memory stick or Calibration file in a safe place. DO NOT
LOSE THE CALIBRATION FILE! It is unique to your touchmonitor and is required
for your touchmonitor to function. You will need this file again if you connect this
touchmonitor to a different computer module, if you reinstall touch drivers on the
same computer module or if you recover or reinstall the operating system.