Uniden CXAI 5198 Marine RADAR User Manual


 
[29] USING THE SPEED DIAL MEMORY
www.uniden.com
Using the Speed Dial Memory
The speed dial memory allows you to store up to 10 names and numbers in the handset
and base. The speed dial memory is stored independently in the base and handset. You
can store up to 10 numbers in the base and up to 10 numbers in the handset. You can
dial these numbers with just a few key presses.
The speed dial memory is not limited to phone numbers. You can store any number (up to
20 digits) that you need to enter once your call connects. This is referred to as Chain
Dialing. For example, you can save your bank account number to speed dial memory. When
you call your bank's telephone teller service and are prompted to enter your account
number, simply press
memory
(
mem
on the base) and the speed dial number where you
stored your account number. Then press
select/int’com
(
set
on the base).
Storing Names and Numbers in Speed Dial Memory
1) With the phone in standby mode, press memory
(
mem
on
the base)
.
2) Enter 0-9 to select the speed dial number where you
would like to store this entry. You can also scroll through
the list with the volume up or down key
( / / /volume or / / /select/volume).
Press select/int’com
(
set
on the base)
twice.
3)
Store Name
appears and a cursor flashes indicating that
the display is ready for the name to be entered.
When editing the speed
dial memory, you must
press a key within 30
seconds or the phone
will return to standby
mode.
note
USING THE SPEED
DIAL MEMORY