Verilux VH01WW4 Marine Sanitation System User Manual


 
9
Job#: 0.000 Title: VH01 Manual
Date: 12/01/09 Version: VH01-MAN-Rev11
Sanitizing Wand Initial Set-up
The battery pack is shipped separately from the Sanitizing Wand. Before using
the Sanitizing Wand, install the battery pack and fully charge the Wand.
Installing the Battery
Note: Be sure the charger is unplugged before installing a new battery pack.
1. Remove the gray handle faceplate on the
underside of the Wand using a screwdriver.
2. Attach the battery cable to the battery pack.
3. Place the battery pack in the battery
compartment.
4. Replace the faceplate. Tighten the screws.
Note: Used batteries should be disposed of
properly and never incinerated.
Note: The UV-C Sanitizing Wand contains a
rechargeable 4.8V Nickel Metal Hydride (NiMH)
battery pack made only by Verilux. Do not
attempt to replace with other brands. To order
a new battery, call Verilux customer service at
1-800-786-6850.
VH01_MAN_Rev11.indd 9VH01_MAN_Rev11.indd 9 12/2/09 9:12 AM12/2/09 9:12 AM