Xantrex Technology 2000i Marine Battery User Manual


 
22 Xantrex PROwatt™ SW International Sine Wave Inverter Owner’s Guide
Specifications
NOTE: Specifications are subject to change without prior notice.
Physical and Environmental Specifications
Length × Width × Height
PROwatt SW 700i
PROwatt SW 1400i
PROwatt SW 2000i
12.2 × 7.3 × 3.5 in. (31 × 18.5 × 9 cm)
14.5 × 9.5 × 4.5 in.(36.9 × 24 × 11.5 cm)
16.5 × 9.5 × 4.5 in. (41.8 × 24 × 11.5 cm)
Weight
PROwatt SW 700i
PROwatt SW 1400i
PROwatt SW 2000i
5.9 lb (2.7 kg)
10.2 lb (4.64 kg)
12.05 lb (5.46 kg)
Operating temperature 32–104 °F (0–40 °C)
DC Input
700i 1400i 2000i
Input power (max. at full load) 840 W 1700 W 2400 W
Input current
(max. at full load)
75 A 155 A 220 A
Input voltage range 10.5–15.5 Vdc
Low battery alarm Audible, 11 V
Low battery cutout 10.5 V
Startup or low battery
recovery
12.0 V
AC Output
700i 1400i 2000i
Continuous power 700 W 1400 W 2000 W
Surge power 1400 W 2800 W 4000 W
Output voltage (nominal) 230 Vac RMS ±10%
Output voltage range 230 Vac ±10%
Output waveform True sine wave
Output frequency 50 Hz ±0.5Hz
Efficiency Approximately 85–90%
No load current draw < 1000 mA
Regulatory Approvals
CE Marking to the following Directives:
Low Voltage Directive 2006/95/EC EN 50178:1997
EMC Directive 2004/108/EC EN 61000-6-1:2007
EN 61000-6-3:2007
PROWatt SW Inverter International.book Page 22 Tuesday, June 30, 2009 9:58 AM