Filter
Top Products
9
Table 1
DC Panel Functions
Item Function
1
Fan and Ventilation Openings
The cooling fan on the units are designed to operate only when
output power is greater than approximately 80 W. When the inverter
is turned on, the fan may operate momentarily. The ventilation
openings should not be covered at any time while the inverter is
operating.
2
A) Positive and B) Negative Cabling Terminals
Connect the ring terminals on the power cables to these terminals. To
ensure correct polarity, red must be connected to red and black must
be connected to black.
XP_Digital_200-400-800.book Page 9 Wednesday, October 26, 2005 2:51 PM