Filter
Top Products
975-0558-01-01 3
Inverter Features
This section describes the different parts of the inverter.
AC Panel
Item Description
1 GFCI-protected AC outlets are used to power loads up
to a combined 1000 watts continuous.
1a GFCI Reset button is used to recover from a ground trip.
1b GFCI Test button is used to manually trip the GFCI
device and cut power from the AC outlets.
2 O
N/OFF Switch turns the inverter’s control circuit on and
off. This switch is not a power disconnect switch.
Disconnect AC and DC power before working on any
circuits connected to the inverter.
3 Remote O
N/OFF Connector Port is used for connecting
the O
N/OFF remote switch.
4 Fault light (red) indicates that the inverter has shut down
due to inverter overload or over-temperature.
5 Power light (green) indicates the inverter is operating.
Figure 2
AC Panel
4
3
5
11a1b
2