Filter
Top Products
INSTRUMENT AND CONTROL FUNCTIONS
3-6
3
EAU37650
Kickstarter
If the engine fails to start by pushing the
start switch, try to start it by using the
kickstarter. To start the engine, fold out
the kickstarter lever, move it down light-
ly with your foot until the gears engage,
and then push it down smoothly but
forcefully.
EAU13960
Seat
To remove the seat
Remove the bolts, and then pull the
seat off.
To install the seat
1. Insert the projections on the front
of the seat into the seat holders as
shown.
2. Place the seat in the original posi-
tion, and then tighten the bolts.
NOTE:
Make sure that the seat is properly se-
cured before riding.
1. Kickstarter lever
1
1. Bolt
1
1. Projection
2. Seat holder
1
2
U5B610E0.book Page 6 Thursday, July 12, 2007 1:41 PM