Filter
Top Products
2-3
E
1
Engine stop switch
Push to stop the engine normally.
2
Clip
Insert into the engine shut-off switch to enable
starting of the engine.
Remove to stop the engine or prevent acci-
dental starting of the engine or unauthorized
use of the watercraft.
3
Quick Shift Trim System (QSTS) selector
Use to select the trim angle of the watercraft.
4
QSTS shift lock lever
5
Engine shut-off switch
Remove the clip to stop the engine and dis-
able it from starting.
6
Start switch
Push to start the engine.
7
Fuel cock knob
Use to select either normal or reserve fuel flow
from the fuel tank to the carburetors, or to shut
off fuel flow.
8
Choke knob
Use to start a cold engine.
9
Engine shut-off cord (lanyard)
Attach to wrist so that the engine stops if the
operator falls off the watercraft.
0
Adjustable rearview mirrors
A
Multifunction meter
Use to check watercraft operation.
B
Shift lever
Use to put the watercraft into forward or
reverse.
C
Throttle lever
Use to accelerate and decelerate.
D
Tilt lever
Use to adjust the tilt of the handlebars.
E
Glove compartment
UF0V12.book Page 3 Friday, June 21, 2002 2:23 PM