4
After you insert the memory card into ECR500 card slot, you can open
My Computer or Explorer, and double click the removable disk to access
the data within the memory card.
During you access the data from ECR500, the Access Led will brink.
Note:
If the USB Mass Storage Device want to run with HS (480 Mbps)
speed, you must to check your PC already support USB 2.0. To verify
it , go to Start Control Panel System Hardware Device
Manager. If “Standard Enhanced PCI to USB Host Controller” is
found in Universal Serial Controllers ,it will support USB 2.0.
Sometimes the string “Standard” will be replaced by another chip
name. If not found, please perform the windows update or install the
USB 2.0 driver from the PC mother board setup CD.
Figure6: Standard Enhanced PCI to USB Host Controller
Figure5: Access LED
