![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/6/4d/64d49cae-c617-4159-9bdf-1bb6650268f9/64d49cae-c617-4159-9bdf-1bb6650268f9-bg58.png)
Chapter 9: Managing the Modem April 14, 2006
9-14 MM70xG2-UM-03
Reset to Factory Defaults using the Reset Button
Step Action
1 Locate the Reset button on the modem’s rear panel (see Figure 1-3 on page 1-4).
2 Use the tip of an unfolded paper clip (or similar object without a sharp tip) to gently press the Reset button
(see Figure 9-13). Hold down on the button for more than 5 seconds to restore all factory default settings.
Figure 9-13. Restore Factory Defaults—Reset Button
NOTE: After uploading code V3.2.0 to the modem using HTTP, perform Factory Defaults using the Reset Button.
!
IMPORTANT
Holding down on the Reset button for LESS than 5 seconds causes the modem to
reboot. For detailed information about rebooting your modem:
• Using the reset button on the back panel of the modem, see “Rebooting the Modem
with the Reset Button” on page 1-6.
• Using the Web Interface, see “Reset to Factory Defaults using the Web Interface”
on page 9-13.
• Using the Command Line Interface, see “Restoring Factory Defaults” on page A-27.