W164 N9221 Water Street • P.O. Box 450 • Menomonee Falls, Wisconsin 53052-0450 • U.S.A.
PHONE: 262.251.3800 800.558.8744 U.S.A./CANADA FAX: 262.251.7067 800.329.8744 U.S.A. ONLY
www.alto-shaam.com
DUE TO O NGOING P RODUCT IMP ROVEMENT, S PECIFICATI ONS ARE S UBJECT T O CH ANGE W ITHOUT N OTICE.
PRINT ED IN U.S.A.
30-5/8" (778mm)
44-1/2" (1130mm)
58-1/2" (1486mm)
31-15/16" (810mm)
3
8" (965mm)
25-11/16" (652mm)
3-5/16" (84,4mm)
29-1/8" (740mm)
3/4"
GAS INLET
3-5/32"
(80,1mm)
8-1/2" (215mm)
9-15/16" (252mm)
LINE CORD ENTRANCE
3-11/16" (93mm)
6
' (1828mm)
LINE CORD ENTRANCE
31-1/16" (789mm)
4" (102mm)
3/4" GAS INLET
12-15/16"
(329mm)
EXHAUST
VENT
CAVITY WIDTH
123°
1
29°
26-1/2" (673mm)
54-5/8" (1387mm)
DI ME NSIO NS H x W x D
EXTERIOR: 5
8-1/2" x 38" x 44-1/2" (1486mm x 965mm x 1130mm)
INTERIOR:
24" x 29-1/8" x 25" (610mm x 740mm x 635mm)
PR OD UCT\ PAN CA PACI TY
72 lb (33 kg)
MAXIMUM
45 qts (43 liters)
12 (twelve): 18" x 26" x 1"
FULL-SIZE SHEET PANS
IN STAL LATI ON RE QU IREM ENT S
— This appliance must be installed level and must
not be installed in any area where it may be affected by
steam, grease, dripping water, high temperatures, or
any other severely adverse conditions.
— Mobile appliances must be installed with a flexible
connector and secured to the building structure by
means of a restraining device (
NOT FACTORY SUPPLIED).
— Hood installation is required (CHECK LOCAL CODES).
WE IG HT
NET 393 lb (178 kg)
SHIP 438 lb (199 kg)
CRATE
40" H X 44" W X 53" D
DIME NSION S: (1016mm x 1118mm x 1346mm)
MINIMUM ENTRY CLEARANCE: 31-1/2" (800mm) UNCRATED
#711 - 09/08
ASC-4G
MI NI MUM C LE ARAN CE RE QU IREM ENT S
COMBUSTIBLE NON-COMBUSTIBLE
SURFACES SURFACES
BACK 0" (0mm) 0" (0mm)
LEFT SIDE 2" (51mm) 0" (0mm)
RIGHT SIDE 2" (51mm) 2" (51mm)
FROM GREASE PRODUCING EQUIPMENT 6" (152mm) 6" (152mm)
RECOMMENDED SERVICE ACCESS: 20" (508mm) RIGHT
EL EC TRIC AL
V
OLTAGE PHASE CYCLE
/ H
Z AMPS
120 1 60 12.5
6' (1828mm) cord with plug included: NEMA 5-15P
GA S: GA S TYPE MUST BE SPECIFIED ON ORDER
CONNECTED ENERGY LOAD: 50,000 Btu/hr
MANIFOLD SIZE: 3/4" NPT
NATURAL PROPANE
MANIFOLD PRESSURE: 5.0" W.C. 10.0" W.C.
MINIMUM INLET PRESSURE: 7.0" W.C. 11.0" W.C.
MAXIMUM CONNECTED PRESSURE: 14.0" W.C.
G
A
S C O
N V
E
C TI O
N OV
E
N
OP TI ONS & A CC ESS OR IES
■■
CASTER SET, 6" (152mm)
FOR MOBILE STACK APPLICATIONS 5003790
■■
COOLING RACK (ONLY) FOR OVEN STAND 5003791
LEG SET (4)
■■
6" (152mm), with Bullet Feet . . . . . . . . . . . . . . . . . . .5003794
■■
6" (152mm), with Seismic Feet . . . . . . . . . . . . . . . . . .5003795
■■
25" (635mm), with Seismic Feel . . . . . . . . . . . . . . . . .5003785
■■
PANEL FOR BACK, Stainless Steel . . . . . . . . . . . . .5005876
SHELF, OVEN RACK
■■
INTERCHANGEABLE WITH COOLING RACK . . . . . . . . . . .SH-26795
STACKING HARDWARE
SEE INDIVIDUAL STACKING COMBINATION SPECIFICATION SHEETS.
STAND, STAINLESS STEEL
■■
Mobile with Cooling Racks & Casters . . . . . . . . . . .5003786
■■
Stationary with Cooling Racks & Bullet Feet . . . . . .5003489
■■
Stationary with Cooling Racks & Seismic Feet . . . .5003787
■■
VENTING KIT (TO VENT DIRECTLY TO OUTSIDE) 5003797
