12
Operation
Coil Modules
WARNING
To avoid risk of serious personal injury, property
damage, or fire, do not leave surface elements
unattended while in operation. Grease and spillovers
can ignite causing a fire.
1. Push in and turn surface element control to desired
setting.
• Cooktop has 1 indicator light for all control knobs.
When an element is on, indicator light glows red.
• Surface element control does not stop at each
setting. See settings below.
LO
—Use to prepare food at less than boiling
temperatures or to simmer.
2
through
6
—Use to maintain boiling of larger
amounts of food, low temperature frying and to
maintain correct pressure in a pressure cooker.
HI
—Use to bring food to boiling temperatures. When
food is boiling, temperature setting should be
reduced.
2. When finished cooking, turn control to
OFF
.
HI
OFF
SIM
2
3
4
5
6
Surface element control knob
• To remove grille module turn all controls to
OFF
,
allow to cool, and reverse steps above.
Installing Griddle
1. Turn all controls to
OFF.
2. Install module pan, grease shield and griddle element
according to “Installing Smoke Control Grill™
Module” section.
3. With grease trap toward rear of cooktop, place griddle
pan over of element.
• To remove griddle module turn all controls to
OFF
and reverse steps above.
Grease
trap
