English
15
n OnChip IDE Channel 0
Allows the user to enable or disable the first onboard IDE channel (default:Enabled)
n OnChip IDE Channel 1
Allows the user to enable or disable the second onboard IDE channel (default:Enabled)
n AC97 Audio
Allows the user to use the onboard AC97 audio (default:Auto)
n USB 1.1 Controller
Allows the user to enable or disable the onboard USB 1.1 (default:Enabled)
n USB 2.0 Controller
Allows the user to enable or disable the onboard USB2.0 (default:Enabled)
n USB Keyboard Support
Allows user to use a USB-based keyboard (Enable if you are using a USB keyboard,
otherwise Disable) (default:Disabled)
n USB Mouse Support
Allows user to use a USB-based mouse (Enable if you are using a USB mouse, otherwise
Disable) (default:Disabled)
n Onboard H/W LAN
Allows the user to enable or disable the onboard LAN (default:Enabled)
n Onboard LAN Boot ROM
Allows user to enable or disable booting from a network drive (default:Disabled)
3.4. Integrated Peripherals
ΓΈ This menu allows you to control the various ports of the computer such as IDE, SATA,
USB, IEEE1394, COM port, LPT port, AC97 audio, etc.
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Integrated Peripherals
OnChip IDE Channel0 [Enabled]
OnChip IDE Channel1 [Enabled]
AC97 Audio [Auto]
USB 1.1 Controller [Enabled]
USB 2.0 Controller [Enabled]
USB Keyboard Support [Disabled]
USB Mouse Support [Disabled]
Onboard H/W LAN [Enabled]
Onboard LAN Boot ROM [Disabled]
Onboard Serial Port 1 [3F8/IRQ4]
Onboard Serial Port 2 [2F8/IRQ3]
Onboard Parallel Port [378/IRQ7]
Parallel Port Mode [SPP]
Game Port Address [201]
Midi Port Address [Disabled]
x Midi Port IRQ 5
Item Help
Menu Level}
If a hard disk
controller card is
used, set at Disabled
[Enabled]
Enable onboard IDE
channel
[Disabled]
Disable onboard IDE
channel
higf: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Save Default F7: Optimized Defaults
