Firmware Updates: Network Management Card Update
60 InfraStruXure InRow RC Service
a. For some FTP clients, use a colon to add the port number to the end of the IP address.
b. For Windows FTP clients, separate the port number from the IP address by a space. For example,
if the unit’s FTP Server Port setting has been changed from its default of 21, such as to 21000,
you would use the following command for a Windows FTP client transferring a file to a unit with
an IP address of 150.250.6.10.
ftp> open 150.250.6.10 21000
4. Log on using the Administrator user name and password (apc is the default for both).
5. Upgrade the AOS. For example:
ftp> bin
ftp> put apc_hw03_aos_xxx.bin
6. When FTP confirms the transfer, type quit to close the session.
7. Wait 20 seconds, and then repeat step 2 through step 5 for the application module. In step 5, use the
application module file instead of the AOS module.
