A SERVICE OF

logo

MacBook (13-inch) Take Apart — Camera Assembly 245
Peel up the single strip of tape that holds the microphone cable in place at the camera
bracket.
Replacement Note: Be sure to install a replacement strip of tape to hold the microphone
cable in place and keep the cable away from areas where it could be pinched when the
panel is reinstalled. Make sure the tape wraps around to the front of the camera bracket.
Hold the LCD panel assembly upright so you can access the two 3-mm long screws that
secure the camera bracket to the top of the LCD panel. Remove the two screws.
4.
5.