Starting Up Your Server 63
Using the Server Without a Monitor
1 Follow all the steps described earlier to set up your computer, including connecting a
monitor, mouse, and keyboard.
2 Configure your server software.
Be sure network services are operating properly.
3 Turn off the server, then disconnect the monitor.
4 Make sure that the Mac-to-VGA adapter (that came with your computer) is connected to the
monitor port.
5 Turn on the computer.
Follow the instructions that came with your remote access software for logging in to and
controlling the computer.
Follow the instructions supplied with the locking cable to secure it to your computer. When
you install the locking cable, feed the cable through the lockable latch on the cover to
prevent memory, disk drives, and expansion cards from being removed.
Security cables that connect to the built-in security lock port are available from other
manufacturers. See your Apple-authorized dealer for more information.
Restoring Your Server’s Software
If you are having problems with the system software or applications that came with your
computer and you want your computer to have its original system software, factory settings,
and applications, you can use the software restore CD that came with your computer. The
restore CD contains the Apple Software Restore application, which lets you restore all your
original software, including the system software, factory settings, and applications that came
with your computer. You have the option of erasing your hard disk before restoring the
original software, or just replacing the original software (Restore In Place).
