A SERVICE OF

logo

Open as PDF
next previous
Chapter 4 Adding Memory to Your PowerBook 59
Step 2: Installing Memory
1 Using a Phillips size 00 screwdriver, unscrew the memory door and remove it from the
bottom of your computer.
2 Touch a metal surface inside the computer to discharge any static electricity from
your body.
3 If you already have a memory card installed in the slot, remove it. Spread the tabs in
the slot away from the notches in the memory card. The card should pop up slightly.
Lift the memory card to a 30-degree angle and then gently slide the card out of the
memory slot.