+
Channel # 5 Timer Output (5)
+
Channel # 6 Timer Output (6)
LCD DISPLAY TRANSMITTER OPERATION ONLY:
Transmitter Button System Function Remark
- (C)
System’s Trigger Record
Check
Press within 3 seconds
- -
(C)
System’s Status Check Press within 3 seconds
- ( )
Button Lock
Press within 3 seconds and
Hold
button for 2 seconds
- ( )
Optional Driving Pager Press within 3 seconds
- ( )
Monitor Indoor Temperature Press within 3 seconds
LCD screen lamp turns on for
5 seconds.
Press and hold for 1 second
- -
Clear the Flash Icon and
Melody Sound on the LCD
Screen Transmitter
Press within 3 seconds
Warning: Press the button two times when the battery
compartment is empty, and then insert the new battery.
B. BUTTON LOCK:
This may be useful if you want to disable the transmission function of the remote
control temporarily to prevent the inadvertent pressing of the buttons. Press the
button first, within 3 seconds press and hold the ( ) button for 2
seconds to activate or cancel the button lock function. The icon will displayed
on the LCD screen to show the LCD remote transmitter is on “Button Lock”.
The 2-way LCD transmitter:
Press the button first, within 3 seconds press
and hold the
( ) button for 2 seconds to activate
or cancel the button lock function.
The icon will be displayed on the LCD screen to
confirm that the LCD remote transmitter is in the
“Button Lock” mode.
