A SERVICE OF

logo

BIPAC-645 DSL/Cable Router plus ISDN Router
2
The Rear Ports
Power
(jack)
Connect the supplied power adapter to this jack.
Console
(port)
Connect the supplied RS-232 cable to this port when
connecting to a PC’s RS-232 port (9-pin serial port).
ISDN So
(RJ-45
connector)
Connect an RJ-45 cable to this port when connecting
to the ISDN.
LAN 1-4
(RJ-45
connector)
Connect an UTP Ethernet cable to this port when
connecting to a LAN such as an office or home
network.
WA N
(RJ-45
connector)
Connect an UTP Ethernet cable to this port when
connecting to the Internet or making other WAN
connections.
Connecting the BIPAC-645
1. Connect the BIPAC-645 to a LAN (Local Area Network)
and the WAN or ISDN.
2. Power on the device.
3. Ensure the Power and LAN LEDs are lit.