A SERVICE OF

logo

Open as PDF
next previous
Example: Conguring your rewall to allow a publicly accessible web server on your LAN
The predened port lter rule for HTTP (TCP port 80) is the same no matter whether the rewall is
set to a high, medium or low security level. To setup a web server located on the local network when
the rewall is enabled, you have to congure the Port Filters setting for HTTP.
As you can see from the diagram below, when the rewall is enabled with one of the three presets
(Low/Medium/High), inbound HTTP access is not allowed which means remote access through
HTTP to your router is not allowed.
Note: Inbound indicates accessing from Internet to LAN and Outbound is from LAN to the
Internet.
74