A SERVICE OF

logo

Rev. 1.00
- 50 -
SRP-F310/312
1. Remove the two screws.
2. Separate the GUIDE TPH
from the ASSY TPH
3. Remove the screw.
4. Separate the ASSY FIXED CUTTER
from the ASSY TPH
5. Remove the two screws.
6. Separate the CUTTER
from the GUIDE CUTTER
7. Remove the SPECIAL SCREW.
8. Separate the E-RING, SHAFT TPH
from the TPH
9. Remove the SPRING TPH, TPH
from the BRACKET TPH