A SERVICE OF

logo

724-746-5500 | blackbox.com
Page 19
5.5 Choose the receiver’s EDID
By default, the transmitter requires the EDID of the sink (e.g. monitor), so
that the best possible resolution the receiver can handle is delivered. When
an EDID is received, the transmitter sends a video stream. If the sink cannot
send an EDID, the transmitter has to be set to “Use default EDID.” The video
stream is then sent with the same resolution as the video source.
On Multicast modus, the EDID is set automatically as “use default EDID.”
Be sure that all monitors support the settings from the source.