Database-assisted label printing
46
Customizing LabelsCreating Labels IntroductionAppendix
6 Scan the “Select template” barcode, and then scan the barcodes under “For entering
numbers” to specify the “Key Assign” number (three digits) for the barcode template.
7 Scan the key barcode whose data is to be
used in the database file.
8 Scan the “Delimiter” barcode.
9 Scan the “Begin printing” barcode.
10 The object data in the specified template
is replaced with the database data, and
the labels are printed.
• Settings can be specified for multiple parameters.
• If no settings have been specified, a label will be printed by P-touch Template Settings. The
default settings for P-touch Template Settings is a single copy with “Auto cut on”. For details on
P-touch Template Settings, download “P-touch Template manual" (English only) from the
following web site.
http://solutions.brother.com/
[Select your region/country]-[Choose your product]-[Downloads].
• To specify the number of copies to be printed, scan the “Number of copies” barcode, and then
scan the barcodes under “For entering numbers” to specify a three-digit number. The setting is
automatically applied when three digits have been specified.
Example:
Specify numbers by scanning barcodes as follows: 7→[00][7], 15→[0][1][5]
• To change the setting for the number of copies, scan the “Number of copies” barcode again, and
then scan the barcodes for the new three-digit number.
• The setting is automatically applied when three digits have been specified.
Example:
Specify numbers by scanning barcodes as follows: 7→[00][7], 15→[0][1][5]
• To change the number, scan the “Select template” barcode again, and then scan the barcodes
for the new three-digit number.
