Chapter 4: Troubleshooting
4-4 DLE22-MA, DLE32-MA, DLE23-MA and DLE33-MA User’s Guide
4.2 DELTX-UI LED
The optional DELTX-UI has one LED labeled 10/100. The 10/100 LED
together with the receive LED allows the user to determine the link status
and the operating speed of the Fast Ethernet Interface Module. The
10/100 LED and the Receive (RX) LED are shown in Figure 4-2.
Table 4-2 and Table 4-3 provide a functional description of the
DELTX-UI LED when the RX LED is on or off, respectively.
TX
Off
Port enabled, and no
activity.
Should flash green every 2
seconds indicating BPDUs
being sent if STA is enabled
and there is a valid link. If STA
is enabled, and the LED does
not flash green, contact your
DIGITAL representative.
Green
Flashing
. Indicates
activity. Rate indicates
data rate.
No action.
Amber
Blinking
. Port in
standby, link.
Port may be disabled due to
Spanning Tree.
Red
Flashing
. Indicates
collision rate.
No action.
Solid
. Diagnostic
Failure.
Contact your DIGITAL
representative for assistance.
Table 4-1 LANVIEW LEDs (Continued)
LED Color State Recommended Action
