95
E
Editing
Recording from Digital Video Devices
(DV Dubbing)
You can record from other digital video devices equipped with a DV terminal with virtually no loss in
picture and sound quality.
1. Connect the camcorder to the digital video device.
See Connecting a Digital Video Device ( 93).
2. Set the POWER dial to VCR and load a blank cassette.
Make sure that [AV\DV] is set to [OFF] ( 98).
3. Connected device: Load the recorded cassette.
4. Press the 2 and a button (or the REC PAUSE button on the wireless controller).
In record pause mode and during recording, you can check the picture on the screen.
5. Connected Device: Play back the tape.
6. Press the a button (or the PAUSE a button on the wireless controller) when the scene
you wish to record appears.
Recording starts.
7. Press the 3 button to stop recording.
•Press the a button to pause recording.
•Press the a button again to restart recording.
8. Connected Device: Stop playback.
❍ Blank sections may be recorded as anomalous picture.
❍ If the picture does not appear, reconnect the DV cable or turn the camcorder off and back on
again.
❍ You can only record signals from devices with the logo recording in SD system in SP or LP
format.
❍ When you press only the 2 button in step 4, recording starts immediately.
