A SERVICE OF

logo

(2) Operation panel removal
(I) Remove the panel cover L and R.
- Insert a flat-blade screwdriver into a space between the panel cover and the scanner unit, and slowly push the cover up to
remove it.
- For claws, see the photos below (5 claws each).
(II) Remove the panel board.
- Remove the 4 screws (in the blue circles in the photo below) from the panel board.
- Release the 2 claws (in the yellow circles in the photo), and raise the panel board.
- While paying attention to the 3 locations at the top of the panel board (in the green circles in the photo) , turn the panel
b
oard over.
1-20