Page 7SKU 94681
For technical questions, please call 1-800-444-3353.
INSPECTION, MAINTENANCE, AND CLEANING
Before each use, inspect the general condition of the Auto Body/Frame Repair
Kit. Check for bent, cracked, worn or damaged parts, loose or missing parts, and
any other condition that may affect the Kit’s safe operation. If a problem occurs,
have the problem corrected before further use.
Do not use damaged equipment.
To clean, use a damp cloth and a mild detergent or mild solvent. Do not use
flammable or corrosive agents.
When storing, keep the Auto Body/Frame Repair Kit in its Carrying Case and
in a clean, dry, safe location out of reach of children and other unauthorized
people.
CAUTION! All maintenance, service, and repairs not discussed in this manual
should only be performed by a qualified service technician.
1.
2.
3.
4.
TROUBLESHOOTING
Problem Possible Cause Possible Solution
Hydraulic Ram will not push or
pull the load.
Release Valve on Hydraulic Pump (not
included) not tightly closed.
Overload condition.
Air trapped in Hydraulic Pump system.
Hydraulic Pump oil level low.
Loose connection from Hydraulic Pump to
Hydraulic Ram.
1.
2.
3.
4.
5.
Close Release Valve tightly.
Do not exceed maximum PSI or range of
travel for Hydraulic Ram.
Purge air from Hydraulic Pump system.
Add oil to proper level.
Make sure connection from Hydraulic
Pump to Hydraulic Ram is secure.
1.
2.
3.
4.
5.
Hydraulic Ram will push or pull,
but will not maintain pressure.
Release Valve on Hydraulic Pump (not
included) not tightly closed.
Overload condition.
Hydraulic Pump or Hydraulic Ram mal-
function.
1.
2.
3.
Close Release Valve tightly.
Do not exceed maximum PSI or range of
travel for Hydraulic Ram.
Have a qualified service technician check
out the Hydraulic Pump and/or Hydraulic
Ram.
1.
2.
3.
The Hydraulic Pull Rams may be used in either horizontal or vertical positions.
The Hooks will turn to accept hooking from different angles. Hook one end of the
Pull Ram to the object to be moved and the other end of the Pull Ram to a stable,
unmovable base. A chain or strap may be used on either end to provide a hooking
surface. Make sure the chain or strap is rated to support the pulling weight.
(See Figure C.)
HOOK
TO CHAIN
OR STRAP
CONNECT TO HYDRAULIC PUMP HOSE
(NOT INCLUDED)
HERE
HOOK
TO CHAIN
OR STRAP
FIGURE C
HYDRAULIC PULL RAM
2.
