SKU 95553 For technical questions please call 1-800-444-3353. Page 2
Specifications
Maximum Height
16-3/4” without screw extension
20” with screw extension
Minimum Height 10-1/4” without screw extension
Ram Travel 6-½”
Air Fitting ¼” NPT with quick release nipple
Operating Pressure 110-120 PSI
Lifting Capacity 20 Tons (40,000 lb.)
Base Dimensions 8-5/8” L x 5-3/16” W
Hose Size 3/8” x 48” L
Weight 35 lb.
Note:
All part numbers mentioned in this manual refer to the Parts Lists and Assembly Diagrams
on pages 8 - 11.
Save This Manual
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
SAFETY WARNINGS AND PRECAUTIONS
WARNING: When using tool, basic safety precautions should always be followed to reduce
the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
Keep work area clean. 1. Cluttered areas invite injuries.
Observe work area conditions. 2. Do not use machines or power tools in damp or wet
locations. Don’t expose to rain. Keep work area well lit.
Keep children away. 3. Children must never be allowed in the work area. Do not let them
handle machines, tools, or extension cords.
Store idle equipment. 4. When not in use, tools must be stored in a dry location to inhibit
rust. Always lock up tools and keep out of reach of children.
Use the right tool for the job. 5. Do not attempt to force a small tool or attachment to do
the work of a larger industrial tool. There are certain applications for which this tool was
designed. It will do the job better and more safely at the rate for which it was intended. Do
not modify this tool and do not use this tool for a purpose for which it was not intended.
Dress properly. 6. Do not wear loose clothing or jewelry as they can be caught in moving
parts. Protective, electrically non-conductive clothes and non-skid footwear are recom-
mended when working. Wear restrictive hair covering to contain long hair.
Use eye, hand and ear protection. 7. Always wear ANSI approved impact safety goggles
when working. Wear a full face shield if you are producing metal filings or wood chips.
Wear an ANSI approved dust mask or respirator when working around metal, wood, and
chemical dusts and mists. Wear protective gloves when handling tools and equipment.
Do not overreach. 8. Keep proper footing and balance at all times. Do not reach over or
across running machines.
