Page 4 of 18 Intimidator™ Spot LED 150 User Manual Rev. 8
Glance
Use on Dimmer
Auto Programs
Outdoor Use
Auto-ranging Power Supply
Sound-Activated
Replaceable Fuse
DMX
User-Serviceable
Master/Slave
Duty Cycle
Please read the following Safety Notes carefully before working with the product. The
Notes include important safety information about installation, usage, and maintenance.
· This product is not intended for permanent installation.
· Always connect the product to a grounded circuit to avoid the risk of electrocution.
· Always disconnect the product from the power source before cleaning or replacing
the fuse.
· Avoid direct eye exposure to the light source while the product is on.
· Make sure the power cord is not crimped or damaged.
· Never disconnect the product from power cord by pulling or tugging on the cord.
· If mounting the product overhead, always secure to a fastening device using a
safety cable.
· Make sure there are no flammable materials close to the product when operating.
·
Do not touch the product’s housing when operating because it may be very hot.
· Always make sure that the voltage of the outlet to which you are connecting the
product is within the range stated on the decal or rear panel of the product.
· The product is for indoor use only! (IP20) To prevent risk of fire or shock, do not
expose the product to rain or moisture.
· Always install the product in a location with adequate ventilation, at least 20 in
(50 cm) from adjacent surfaces.
· Be sure that no ventilation slots on the product’s housing are blocked.
· Never connect the product to a dimmer.
· Make sure to replace the fuse with another of the same type and rating.
· Never carry the product from the power cord or any moving part. Always use the
hanging/mounting bracket or the handles.
· The maximum ambient temperature (Ta) is 104° F (40° C). Do not operate the
product at higher temperatures.
· In the event of a serious operating problem, stop using the product immediately.
· Never try to repair the product. Repairs carried out by unskilled people can lead to
damage or malfunction. Please contact the nearest authorized technical assistance
· Keep this User Manual. If you sell the product to another user, be sure that they
also receive this document.
