Setup
-8- OVATION™ E-190WW User Manual Rev. 3
Before mounting this product, read and follow the Safety Notes.
Always mount this product in a safe position. The OVATION™ E-190WW may be
mounted in any position; however, make sure there is adequate room for ventilation
configuration, and maintenance.
CHAUVET® recommends using the following general guidelines when mounting this
product.
· When selecting an installation location, consider easy access to this product for
operation, programming adjustments, and routine maintenance.
· Make sure to mount this product away from any flammable material as indicated in
the Safety Notes
.
· Never mount in places where rain, high humidity, extreme temperature changes, or
restricted ventilation may affect the product.
· If hanging this product, make sure that the mounting location can support the
product’s weight. See the Technical Specifications
for the weight-bearing
requirements of this product.
· When hanging this product, always secure to a fastening device using a safety cable
The OVATION™ E-190WW comes with a hanging/mounting bracket to which you can
attach mounting clamps. The bracket has 13-mm holes
, which are appropriate for this
purpose. You must supply your own mounting clamps, so be
capable of supporting the weight of this product. Use at least one mounting point per
product where necessary.
Mounting Diagram
Bracket
Hand Shank
Bracket
Mounting Clamp
(works with CLP-15 or CLP-15N
clamp from CHAUVET®)
Safety Cable
(works with CH-05
cable from CHAUVET®)
Secure the safety
cable using the
passageway on the
top of the product
Alternative Yoke
Attachment
