A SERVICE OF

logo

Open as PDF
next previous
Reverse
the
steps to remove the
T-top
panels
from storage.
1.
When installing the panels to the roof, keep the
outboard edge of the panel raised about
3
inches
above the roof while placing the inboard edge of
the panel under the center roof rail.
2.
After the inboard edge of the panel is in position
under the center roof rail, lower the outboard edge
of the panel into position, close the latch and lock
the T-top.
I
NOTICE:
Do not attempt to install the panels by sliding
them horizontally towards the center roof rail.
Doing
so
may cause the weatherstrips to be
aligned improperly, which may result in leaks
and possible damage to the weatherstrips.
2-65